Sony FDR-AX40 How To Use Manual page 100

[Connect Device Swt] (displayed when one camera is connected)
Disconnects the currently connected camera and selects another device.
[Connect Device Reg] (displayed when several cameras are connected)
Registers cameras that have not been registered before.
[Shooting Mode]
Selects the shooting mode of the connected camera (for one camera when only one camera
is connected and for all cameras when several cameras are connected).
[ Movie]: Records movies.
[ Still Image]: Records photos.
[ Interval Shoot]: Continues to record photos at regular intervals.
[ Audio]: Records sound only.
[Shooting Settings]
Movie shooting settings (displayed when one camera is connected and the Shooting
Mode is set to [
You can configure settings for movie shooting of the connected camera.
[Recording Mode]: Sets the movie image quality.
[ SteadyShot]: Sets to activate the camera-shake reduction.
[ Shooting Angle]: Sets the shooting angle.
[Flip]: Sets whether to record images upside down.
[ File Format]: Sets the file format for recording movies.
Still image shooting settings (displayed when one camera is connected and the
Shooting Mode is set to [
You can configure settings for photo shooting of the connected camera.
[Flip]: Sets whether to record images upside down.
[ Drive Mode]: Sets the continuous shooting method.
[ Shooting Interval]: Sets the interval of continuous shooting.
[ Self-Timer]: Sets self-timer.
Interval shooting settings (displayed when one camera is connected and the Shooting
Mode is set to [ Interval Shoot])
You can set the interval period for consecutive recordings of the interval photo recording.
[Flip]: Sets whether to record images upside down.
[ Shooting Interval]: Sets the interval period for in how many seconds a photo is recorded.
Connecting device settings (displayed when one camera is connected)
You can configure the settings of the connected camera.
[Beep]: Sets whether to emit operation beeps.
Note
Movie])
Still Image])