If You Have Problems - Sony FDR-AX40 How To Use Manual

When [Digital Zoom] is set to [250x]
250 times
[223] How to Use
Using this product after a long time
In case you have not used this product for several months, check the following before use.
When the date and clock settings are initialized, reset it by selecting
Clock Settings] - [Date & Time Setting].
Be sure to charge the battery of this product before use. For details, see "Charging the
battery pack using the AC Adaptor."
It may be required to change the movie format to view images recorded in the past. For
details, see "Playing MP4 Movies ( HD movie) (switching the movie format)."
[224] Troubleshooting

If you have problems

If you run into any problems using this product, follow the steps below.
1. Check the items under "Troubleshooting," and inspect this product.
2. Disconnect the power source, attach the power source again after about 1 minute, and
turn this product on.
3. Perform [Initialize].
If you select [Initialize], all settings, including the clock setting, are reset.
4. Contact your Sony dealer or local authorized Sony service facility.
Note
You may need to initialize or change the current internal memory (Models with the internal
memory) of this product depending on the problem.
If you do so, the data stored on the internal memory (Models with the internal memory)
will be deleted. Be sure to save the data on the internal memory (Models with the internal
memory) on other media (backup) before sending this product for repair. We will not
Additional information
Troubleshooting
Using this product after a long time
If you have problems
- [Setup] - [