Sony FDR-AX40 How To Use Manual page 103

3. Select
4. Select .
5. Select [Connect Device Reg].
This product enters registration waiting status (registration waiting status ends in
about 2 minutes).
6. Perform connecting operation on the camera you want to connect with this product.
For details on the Wi-Fi connection, refer to the instruction manuals of the cameras.
7. Select [OK] when it is displayed on the screen of the product to finish the registration.
8. Repeat steps 4 to 7 for each camera you want to connect.
Note
A maximum of five cameras (compatible with Multi Camera Control) can be registered to
this product.
The operations in step 4 - 8 are necessary only for the first-time registration.
Change the settings of the camera you want to connect to before the registration waiting
status of this product ends.
This product displays a character string deleting "DIRECT-" from the SSID of the camera
you want to connect to as the SSID of the camera.
[86] How to Use
product
Editing images recorded with several cameras
By importing images recorded with several cameras to a computer, you can edit PinP
(Picture in Picture; an image with an inset window of another image) clips, etc.
Installing PlayMemories Home
To edit PinP clips, etc., you need to install PlayMemories Home on your computer.
PlayMemories Home can be installed from the following URL.
http://www.sony.net/pm/
[87] How to Use
- [Wireless] - [ Function] - [Multi Camera Control].
Using the Wi-Fi function
Menu operations
Controlling other cameras through this
Using menu items