Default Configuration - NETGEAR DG834Gv5 Setup Manual

Default Configuration

You can use the reset button located on the rear panel of your Wireless ADSL2+ Modem Router to
reset all settings to their factory defaults. This is called a hard reset. To perform a hard reset, push
and hold the reset button for three seconds. Your Wireless ADSL2+ Modem Router will return to
the factory configuration settings shown in the table below.
Table 2. Factory Default Configuration Settings
Feature
Router Login
User login URL
User name (case sensitive)
Login password (case sensitive)
Internet Connection
WAN MAC address
WAN MTU size
Port Speed
Local Network (LAN)
Lan IP
Subnet mask
DHCP server
DHCP starting IP address
DHCP ending IP address
DMZ
Time zone
Time zone adjusted for daylight saving
time
Firewall
Inbound (communications coming in from
the Internet)
Outbound (communications going out to
the Internet)
Source MAC filtering
34
Default Behavior
http://www.routerlogin.net or http://www.routerlongin.com
admin
password
Use default address
1500
AutoSense
192.168.0.1
255.255.255.0
Enabled
192.168.0.2
192.168.0.254
Disabled
GMT
Disabled
Disabled (except traffic on port 80, the http port)
Enabled (all)
Disabled
Technical Specifications and Default Configuration