Verifying Your Connection - NETGEAR DG834Gv5 Setup Manual

Improperly connecting a filter to your wireless modem router will block
your ADSL connection.
3. Connect the Ethernet cable (D) from a wireless modem router LAN port to the Ethernet
adapter in your computer.
Connect the power adapter to the router and plug it in to a power outlet.
4.
D
Figure 10
Connect any additional wired PCs to your router by inserting an Ethernet cable from a PC into
5.
one of the three remaining LAN ports.

Verifying Your Connection

Verify that your router is connected correctly by checking the wireless modem router status lights.
• The power light is lit after turning on the router.
• The DSL Internet light is lit, indicating a DSL connection.
• The wireless light is lit after turning on the router.
• The Internet light is green, indicating you are connected to the ADSL network.
Now, turn on your computer. If software usually logs you in to your Internet connection, do not run
that software. Cancel it if it starts automatically. Verify the following:
Installing Your Router Manually (Advanced, Mac, and Linux Users) 15