Speed Dial - Yealink SIP-t20p Quick Start Manual

If there is more than one call on hold, press
press .
Call Transfer
You can transfer a call in the following ways:
Blind Transfer
1. Press during an active call. The call is placed on hold.
2. Enter the number you want to transfer to.
3. Press .
Semi-Attended Transfer
1. Press during an active call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press
3. Press when you hear the ring-back tone.
Attended Transfer
1. Press during an active call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press
3. Press when the second party answers.
Call Forward
To enable call forward:
1. Press when the phone is idle, and then select Features->Forward.
2. Select the desired forward type:
Always----Incoming calls are all forwarded unconditionally.
Busy----Incoming calls are forwarded when the phone is busy.
No Answer----Incoming calls are forwarded when the phone is not answered
3. Enter the number you want to forward to. For No Answer, enter the ring time to wait
before forwarding.
4. Press to accept the change.
Call Conference
1. Press during an active call. The call is placed on hold.
2. Enter the number of the second party, and then press
3. Press again when the second party answers. All parties are now joined in the
conference.
4. Hang up the handset to disconnect all parties.

Speed Dial

To configure a speed dial key:
1. Press when the phone is idle, and then select Features->DSS Keys.
2. Select the desired DSS key, and then press
3. Select Speed Dial from the Type field, select the desired line from the Account ID field, and enter
the number in the Value field.
4. Press to accept the change.
To use the speed dial key:
Press the speed dial key to dial out the preset number.
after a preset time period.
or to select the desired call, and then
.
.
.
.
E
N
G
L
I
S
H
5