Running Diagnostic Utilities - NETGEAR CVG824G Reference Manual

After an erase, the gateway user name is admin and the password is password. The LAN IP
address is 192.168.0.1, and the DHCP client is enabled.
Note: To restore the factory default configuration settings without knowing the login
password or IP address, use the reset button on the rear panel of the gateway.
Use a paper clip to press the button for at least five seconds.

Running Diagnostic Utilities

You can use Diagnostics to test connectivity to a PC with the Ping command. From the
Maintenance menu, click Diagnostics.
Figure 4-6
To perform a Ping test:
1. In the Ping Target field, enter the IP address of the PC that you want to ping.
Managing Your Network
Wireless Cable Voice Gateway Model CVG824G Reference Manual
1.0, November 2006
4-9