Installing The Voice Gateway; Installation Requirements - NETGEAR CVG824G Reference Manual

Wireless Cable Voice Gateway Model CVG824G Reference Manual
Figure 1-2

Installing the Voice Gateway

Installation is a four-part process. Complete the installation in this order:
1. Check the Installation Requirements. See
2. Connect the Gateway. See
3. Log in to the Gateway. See
4. Connect to the Internet. See
After installation, set up the wireless connection as explained in
Configuration".

Installation Requirements

Check the requirements listed below before installing the gateway:
• Local Computer. During installation, you need a local computer to connect to the gateway via
Ethernet or USB.
– This computer should be set up to access the cable modem Internet service.
1-4
Wireless antenna
USB port
AC power adapter input
"Connecting the Wireless Voice Gateway" on page
"Logging In To the Wireless Voice Gateway" on page
"Connecting to the Internet and VoIP" on page 1-8
v1.0, November 2006
Reset button
Coaxial cable to your cable
service provider
Four Ethernet LAN ports to connect local
computers
"Installation Requirements" on page
Chapter 2, "Wireless
Voice/phone ports to
connect handsets
1-4.
1-5.
1-7.
.
Installing the Gateway