Cylinder Head Cover - Installation - MTU 20V4000L33F Operating Instructions Manual

6.4.5 Cylinder head cover – Installation
Special tools, Material, Spare parts
Designation / Use
Gasket
NOTICE
Contamination of components.
Damage to component!
• Observe manufacturer's instructions.
• Check components for special cleanliness.
Installing cylinder head cover
1. Clean mounting surface.
2. Check condition of gasket, replace if dam-
aged.
3. Position gasket and cylinder head cover (1)
on cylinder head.
4. Insert screws (2) in cylinder head cover and
tighten them.
Note: The locking plate must be removed from
the cylinder head cover.
5. Install spark plug connector (→ Page 139).
150 | Task Description | MS150108/00E 2013-06
Part No.
(→ Spare Parts Catalog)
Qty.