Sony Bravia KDL-40ZX1 Operating Instructions Manual page 7

Place the spacers (black) on the screw holes
2
of the previous procedure.
2
Follow steps 4-3 to 4-4 referring to the
instruction manual supplied with the
Wall-Mount Bracket.
When using only the Wall-Mount
Bracket
Proceed to the following step 5 in this
manual.
When using the Speaker System
Proceed to the following step 3 in this
manual.
3
Lift the Lock Bracket to insert the Speaker
System (4-5).
Mounting Bracket
Lock Bracket
This part goes on top of the Mounting Bracket
Speaker System
Insert to the joint of
the monitor
4
Fix the Speaker System with two screws
(supplied with the Speaker System).
Screws
5
See the instruction manual supplied with
the Wall-Mount Bracket, and follow steps
4-6 to 4-7.
6
Connect the AC power cord (supplied) to
the AC IN jack (5-1).
AC IN
When installing the Speaker System
Fix the AC power cord with the two
hooks, and drop the lead down from the
right edge of the monitor.
~
• When using with an HDMI equipment, also
connect the HDMI cable to the HDMI IN
jack (page 27).
7
Follow the instruction manual supplied
with the Wall-Mount Bracket to continue
installing this product on the wall.
~
• You cannot connect the cables to the monitor
after it is wall-mounted.
• When moving the monitor, lift it with a soft
cloth underneath to prevent damage. Do not
hold the speaker.
to AC power
outlet
7
GB