Sony Bravia KDL-40ZX1 Operating Instructions Manual page 12

6: Operating optional
equipment using the remote
Connecting IR Blaster to the optional
equipment
Turn the power of the media receiver off
before connecting the IR Blaster.
Attach the IR Blaster near the remote sensor
(IR) of the equipment.
Media receiver
Optional equipment
Performing the IR Blaster Set-up
By setting "IR Blaster Set-up", this remote can
control most Sony Blu-ray Disc players, DVD
players, DVD recorders, and AV receivers.
Follow the steps below to programme the
remote.
1
Press HOME on the remote.
2
Press G/g to select "Settings".
3
Press F/f to select "Media Receiver Set-
up", then press
4
Press F/f to select "IR Blaster Set-up",
then press .
The "IR Blaster Set-up" screen appears.
IR Blaster Set-up
Inputs Type
-
Video
HD/DVD -
HDMI 1 Blu-ray Disc
HDMI 2 -
HDMI 3 -
12
GB
IR BLASTER
IR
Blaster
.
Make Code
- -
- -
Sony 1
- -
- -
5
Press F/f to select "Inputs" to register the
remote, then select the following items:
Type: Connected equipment category.
Make: Maker of the equipment (this unit
supports only Sony products).
Code: IR code. The default IR code "1"
appears when the type of the equipment is
selected.
Test: Tests the power of the equipment
currently being set. Make sure the power
of the equipment turns on and off.
If the equipment is not working, or
some of the functions do not work
Enter the correct code or its alternatives (if
available) shown in the list in step 5. Note that
the list may not include codes for all models of
all brands.
~
• This function is not guaranteed to work with all
devices.