Sony Bravia KDL-40ZX1 Operating Instructions Manual page 22

Item
1 Remote control sensor
2 1 (Power)
3 Light Sensor
4 (Picture Off/Timer
indicator)
5 1 (Standby indicator)
6 " (Power indicator)
7 LINK indicator
8 (HOME)
HOME
9
/ (Input select/OK)
0 2 +/–/ /
qa PROG +/–/
/
~
• Make sure that the unit is completely turned off before unplugging the AC power cord. Unplugging the AC
power cord while the unit is turned on may cause the indicator to remain lit or may cause the unit to
malfunction.
• Do not put anything over the indicators as their functions may be affected.
• When the media receiver is used vertically with the stand attached, the 0 and qa button functions (in the
unit menu) are exchanged.
22
GB
Description
Receives IR signals from the remote (if using an IR remote, not
supplied).
Do not put anything over the sensor, as its function may be affected.
Turns the unit on or off.
~
• To disconnect the unit completely, pull the plug from the AC power.
Do not put anything over the sensor, as its function may be affected.
Lights up in green when the picture is switched off (page 46).
Lights up in orange when the reminder is set (page 25) or the timer is set
(page 33).
Lights up in red when the unit is in standby mode.
Lights up in green when the unit is turned on.
Lights up when the wireless connection between the media receiver and
monitor is stable.
Displays the media receiver Home menu in the media receiver mode
(page 32), or monitor Home menu in the monitor mode (page 41).
In monitor mode: Selects the input source from equipment connected to
the unit jacks (page 27).
In unit menu: Selects the menu or option, and confirms the setting.
In monitor mode: Increases (+) or decreases (–) the volume.
In unit menu: Moves through the options right ( ) or left ( ).
In TV mode: Selects the next (+) or previous (–) channel.
In unit menu: Moves through the options up ( ) or down ( ).