Inserting Batteries Into The Remote - Sony Bravia KDL-40ZX1 Operating Instructions Manual

5: Performing the initial set-
up

Inserting batteries into the remote

Push and lift the cover to open.
~
• Observe the correct polarity when inserting
batteries.
• Do not use different types of batteries together or
mix old and new batteries.
• Dispose of batteries in an environmentally
friendly way. Certain regions may regulate the
disposal of batteries. Please consult your local
authority.
• Handle the remote with care. Do not drop or step
on it, or spill liquid of any kind onto it.
• Do not place the remote in a location near a heat
source, a place subject to direct sunlight, or a
damp room.
Establishing the wireless
communication between the unit
~
• This unit should be placed in the same room.
• Keep about 30 cm to 20 m distance between the
monitor and media receiver when installing.
• Keep clear the area between the monitor and
media receiver. Otherwise the picture may
deteriorate.
• Rearrange the installation position of the monitor
and media receiver in case of fuzzy picture.
• Do not place either unit on a metallic rack.
• Do not use two units or more at the same time in
an area of radio interference.
1
Press 1 to turn on the unit power.
Media receiver
10
GB
POWER button
Monitor
2
Check the LINK indicator on the media
receiver.
If wireless communication between the
media receiver and monitor is established,
this indicator lights up.
LINK indicator
LINK
LINK
Performing the initial set-up
HDMI 1 HDMI 2 HDMI 3
MONITOR VIDEO
HDMI
SYNC MENU
DIGITAL/
THEATRE
ANALOG
When you switch on the unit for the first
time, the remote registration screen
appears.
1
Press buttons according to the screen
message to register the remote.
POWER button
TV
1
EXT
HD/DVD
AUDIO
1-9