Sony Bravia KDL-40ZX1 Operating Instructions Manual page 28

Connect to
1
/ /
VIDEO IN
2 /
HD/DVD IN
3
4
DIGITAL AUDIO
OUT (OPTICAL)
5 (RGB)/
PC IN
6 HDMI IN 1/2/3,
MONITOR HDMI
IN
7 IR BLASTER
8 i Headphones
9 USB
28
GB
Input symbol on Description
screen
Video To avoid picture noise, do not connect the camcorder to the
video jack
If you connect mono equipment, connect to the L jack
HD/DVD The component video jacks support the following video
inputs only: 480i, 480p, 576i, 576p, 720p, 1080i and 1080p.
You can listen to the sound from the TV on Hi-Fi audio
equipment. To turn off the sound of the TV speakers, set
"Speaker" to "Audio System" (page 35).
Use an optical audio cable.
~
• No sound is output in the monitor mode.
PC It is indispensable to use a PC cable with ferrite cores.
HDMI 1/ Digital video and audio signals are input from the connected
HDMI 2/ equipment.
HDMI 3/
In addition, when you connect the equipment that is
MONITOR compatible with control for HDMI, communication with the
HDMI connected equipment is supported. Refer to page 36 to set up
this communication.
~
• The HDMI jacks support the following video inputs only:
480i, 480p, 576i, 576p, 720p, 1080i, 1080p and 1080/24p
(1080/24p is for MONITOR HDMI only). For PC video
inputs, see page 49.
• Be sure to use only an authorised HDMI cable bearing the
HDMI logo.We recommend that you use a Sony HDMI
cable (high speed type).
• For HDMI 1/2/3, when connecting an audio system that is
compatible with control for HDMI, be sure to also connect
it to the DIGITAL AUDIO OUT (OPTICAL) jack.
Connects the supplied IR Blaster cables.
You can listen to monitor sound through headphones.
You can enjoy photo files stored in a Sony digital still camera
or camcorder through a USB cable or USB storage device on
your unit (page 30).
and the S video jack at the same time.
.