Table of Contents
Advertisement
User's Manual for the NETGEAR Super AG Wireless USB 2.0 Adapter WG111U
How to Configure WEP Encryption Security
Follow the steps below to configure WEP Encryption Security.
1. Run the WG111U Smart Wireless Wizard.
Make sure the WG111U software is installed and the WG111U is fully inserted in the USB
a.
port of your PC.
Open the configuration utility by clicking on the WG111U icon
b.
desktop or in the system tray. The Settings page opens.
2. Configure the Network Name (SSID) settings.
Enter the SSID. This is also called the Wireless Network Name.
Tip: Click the Networks tab to view a list of the available wireless networks and their SSIDs.
Configure the WEP settings.
3.
Select the WEP radio button.
a.
Figure 5-1: WEP settings screen
5-4
202-10065-01
on the Windows
Wireless Security Configuration
Advertisement
Table of Contents
