Table of Contents
Advertisement
NETGEAR RangeMax Wireless USB 2.0 Adapter WPN111 User Manual
Setting up WEP Encryption Security
Follow the steps below to configure WEP Encryption Security.
1. Run the WPN111 Smart Wizard.
a. Make sure the WPN111 software is installed and the WPN111 is connected to the USB
port in your computer.
b. Use the
icon to open the Smart Wizard. The Settings tab page opens.
Figure 2-9
2. Configure the Security settings.
a. In the Profile box, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
Note: You will not get a wireless network connection unless the network SSID
matches exactly what is configured in the access point.
c. In the Security section, select WEP.
3. Select the WEP encryption strength you will use.
2-12
v2.0, February 2007
Advertisement
Table of Contents
