Setting Up Wep Encryption Security - NETGEAR WNA1100 - Wireless-N 150 USB Adapter User Manual

c. In the Security section, select WPA-PSK [TKIP] or WPA2-PSK [AES], and enter the
passphrase.
Figure 2-10
For more about WPA2-PSK, click the link to
Appendix B.
3. Save your settings in a profile.
a. Click the Save Profile button. All the configuration settings are saved in this profile.
b. Click Apply, and then click Close to exit the Smart Wizard.

Setting Up WEP Encryption Security

To configure WEP encryption security:
1. Run the WNA1100 v1 Smart Wizard.
a. Make sure that the wireless-N USB adapter is connected to the USB port in your
computer.
b. Use the icon to open the Smart Wizard. The Settings tab displays.
2. Configure the security settings.
a. In the Profile field, select the profile, or type in a profile name.
Wireless-N 150 USB Adapter WNA1100v1 User Manual
"Wireless Networking Basics" in
v1.0, December 2009
2-11