2-36.IMPEDANCE UNIT (SP),
FLYWHEEL (SP)
SET POSITION : Normal
(Removal)
1. Unfasten the two catches (a) on the IMPEDANCE
UNIT (SP) shown in Fig. 2-36, and remove the
FLYWHEEL (SP).
2. Remove the screw (b) on the IMPEDANCE UNIT
(SP) shown in Fig. 2-36, and remove the IMPEDANCE
UNIT (SP).
(Installation)
1. Install the IMPEDANCE UNIT (SP) shown in Fig. 2-36.
2. Install the FLYWHEEL (SP) shown in Fig. 2-36.
2-37.SSW HOLDER, SSW SLIDER
SET POSITION : Upside down
To access the SSW UNIT, remove the following parts :
• STAY PLATE (Para. 2-2)
• BOTTOM ASSY (Para. 2-3)
(Removal)
1. Remove the SSW SLIDER shown in the Fig. 2-37 .
2. Unfasten the two catches (a) shown in Fig. 2-37, and
remove the SSW HOLDER.
(Installation)
1. Install the SSW HOLDER shown in Fig. 2-37.
2. Install the SSW SLIDER shown in Fig. 2-37.
FLYWHEEL (SP)
IMPEDANCE UNIT
(SP)
SSW SLIDER
SSW HOLDER
- 29 -
a
a
b
Fig. 2-36
a
a
Fig. 2-37