Thrust Washer; Slip Spring, Slip 2 Washer; Thrust Washer, Slip Adjuster; Idler 2 Unit - Mitsubishi hs-u778 Service Manual

2-14.REEL BELT, PULLEY BUSH, THRUST
WASHER, BELT PULLEY, SHIFT
SLIDER, PULLEY GEAR ASSY, SLIP
GEAR, SLIP SPRING, SLIP 2
WASHER, THRUST WASHER, SLIP
ADJUSTER, IDLER 2 UNIT
SET POSITION : Upside down
(Removal)
1. Remove the REEL BELT shown in the Fig. 2-14-1.
2. Move the SHIFT SLIDER in the Fig. 2-14-1 in the
direction shown of the arrow A to remove the SHIFT
SLIDER from the SHIFT LEVER.
3. Release the two catches (a) of the PULLEY BUSH
shown in the Fig. 2-14-1 to remove the PULLEY
BUSH.
Note : Be sure to replace the removed PULLEY BUSH
with a new one.
4. Remove the units from the THRUST WASHER to
IDLER 2 UNIT shown in the Fig. 2-14-1.
(Installation)
Note : Be careful so that GREASE and OIL does not
adhere on the Felt Side of the PULLEY GEAR
ASSY or the Grooved Side of the SLIP GEAR
shown in the Fig. 2-14-4.
1. Apply OIL (FLOIL 948P) [859D154O20] to the SHAFT
for the IDLER 2 UNIT shown in the Fig. 2-14-1.
2. Apply GREASE (PG-641) [859D055O30] to the parts
on the IDLER 2 UNIT specified in the Fig. 2-14-1.
3. Apply GREASE (MULTEMP AC-DM) [859D055O90]
to the parts on the MAIN PLATE ASSY specified in the
Fig. 2-14-1.
4. Apply GREASE (PG-641) [859D055O30] to the parts
on the new SHIFT SLIDER specified in the Fig. 2-14-
2.
5. Apply GREASE (PG-641) [859D055O30] to the parts
on the new SLIP ADJUSTER specified in the Fig. 2-
14-2.
6. Apply GREASE (PG-641) [859D055O30] to the parts
on the new BELT PULLEY specified in the Fig. 2-14-3.
7. Install the IDLER 2 UNIT shown in the Fig. 2-14-1.
8. Install the SLIP ADJUSTER shown in the Fig. 2-14-3,
matching the Lug of the SLIP ADJUSTER with the
Center Notch of the IDLER 2 UNIT.
a
GREASE
(PG-641)
GREASE (MULTEMP AC-DM)
SHIFT LEVER
SLIP ADJUSTER
Apply GREASE (PG-641) to the parts
- 9 -
REEL BELT
PULLEY BUSH

THRUST WASHER

BELT PULLEY
Pull in the direction
A
of the Arrow (A) to
remove it from the
SHIFT LEVER.
SHIFT SLIDER
PULLEY GEAR ASSY
SLIP GEAR
SLIP SPRING
SLIP 2 WASHER
THRUST WASHER
SLIP ADJUSTER
GREASE (PG-641)

IDLER 2 UNIT

OIL (FLOIL 948P)
Fig. 2-14-1
SHIFT SLIDER
Fig. 2-14-2
.