Location Of Users Control - Sharp LC-13S1H Operation Manual

LOCATION OF USERS CONTROL

Main unit (front view)
Upper control panel
LC-20S1H
LC-13/15S1H
Speaker
OPC sensor
Remote control sensor
Note:
• TV/VIDEO, CH ( )/( ), VOL (–)/(+), and MENU on the main unit have the same functions as the same buttons
on the remote control. Basically, this operation manual provides a description based on operation with the remote
control.
8
2 PRESET 1
VOL (–)/(+)
CH ( )/( )
2 PRESET 1
VOL CH
HEADPHONE jack
Plug the headphone mini-plug into the HEADPHONE
jack located on the front of the TV set.
OPC indicator (Optical Picture Control)
The Optical Picture Control indicator lights up green
when the BRIGHTNESS is set to AUTO. (See page 25.)
POWER indicator
A green indicator lights when the power is on and a red
indicator lights when in the standby mode (the indicator
will not light when the main power is off).
* The examples used throughout this manual are based
on the LC-20S1H model.
MENU MAIN POWER
TV/VIDEO
MENU TV/VIDEO MAIN POWER
The screen can be adjusted
backwards to an angle be-
tween 12 degrees and 35
degrees. The screen cannot
be set up straight. When
changing the angle, make sure
to hold the stand and adjust
the screen to the best viewable
angle.
Adjustable
range