Presetting The Channels (Manual) - Sharp LC-13S1H Operation Manual

Presetting the Channels (MANUAL)

Upper control panel
4 3 1, 2, 6
2
POWER
DISPLAY
SLEEP BRIGHT
MENU
TV
LANGUAGE DIS.MODE VIDEO
VOL
CH
-/--
MPX
Upper control panel
4 1, 2, 3, 5
2
18
I Setting a channel to a desired TV
station:
1
Press MENU (PRESET-1) on the
upper part of the LCD TV set for
more than 2 seconds. The AUTO
mode screen appears.
2
Press MENU (PRESET-1) to
PRESET 1
display the MANUAL mode screen.
Press MENU (PRESET-1) again
to change the MANUAL mode as
shown below.
AUTO → MANUAL → LANGUAGE →
MENU
3
Select the channel position using
CHANNEL SELECT or CH (
(
4
Press VOL (+)/(–) to locate the
VOL(+)/(–)
channel you want to preset to the
CH ( )/( )
position. Search is initiated and
when a TV signal is received
during the search, the search
CHANNEL
stops.
SELECT
5
Repeat steps 3 and 4 above, to
preset the channel positions for
other broadcasts, etc.
6
Press MENU (PRESET-1) to
return to the normal screen.
Note:
• SYSTEM may not have been set correctly,
if noise can be heard or if there is no
sound.
In such case, reset to SOUND SYSTEM
using MENU.
I
In a weak reception area, or under
bad reception conditions.
1
Press MENU (PRESET-1) on the
upper part of the LCD TV set for
more than 2 seconds. The AUTO
mode screen appears.
2
Press MENU (PRESET-1) to
PRESET 1
display the MANUAL mode screen.
3
While the MANUAL mode screen
is displayed, press MENU (PRE-
SET-1) for more than 2 seconds.
The channel position number
remains in green.
Note:
• While the MANUAL mode screen is
displayed, press MENU (PRESET-1).
(The LANGUAGE mode screen will
appear.)
4
Adjust for good reception using
VOL (+)/(–).
5
After finishing the adjustment,
press MENU (PRESET-1) to
continue channel presetting.
PRESET (Continued)
).
Sound System
I
NORMAL
Auto mode screen
SCREEN
)/
I
Manual mode screen
I
Channel position
I
I
ENGLISH
SELECT:
number
EXIT:
MENU