Table of Contents
Advertisement
6
RESETTING YOUR SYSTEM
Important: If you need to reset your system you will lose any information that you
have stored and all settings will return to their default settings
There are two levels of reset procedures:
6.1 Resetting the DECT phone
Level 1: With your PIN code
* Press
* Press
and select "Setup"
* Press
* Press
and select "Default"
* Press
* Enter PIN code and press
* Confirmation melody will come from handset
Then both handset and base will start the reset sequences.
Default Settings:
language
English
handset name
HANDSET
low batt indicator
O N
out of range indicator O N
keyclick
O N
auto answer
O N
Level 2: If you forget your PIN code, you will need to reset the PIN code to the
default value of "0000"
* Remove the handset batteries
* Press and hold
* Insert the batteries into the handset again then release
* Handset display shows "Default"
* Press any key to return to Standby mode
6.2 Resetting the weather station
* Place a blunt stylus into the hole marked RESET on the back of the base unit .
6.3 Resetting the sensor
* Lift open the battery compartment door
* Place a blunt stylus into the hole marked [RESET] and press.
* Replace the battery compartment door
INT melody
1
PIN CODE
ring volume
3
dial mode
ear volume
2
ring priority
phonebook
empty
PABX codes
CLID list
empty
Redial list
empty
41
0000
D T M F
none
none
Advertisement
Table of Contents
