Dial Mode; Pabx Features; Security Pin - Oregon Scientific wd338 User Manual

3.6 Dial mode

In order to provide compatibility with other telephone systems, your phone can be
set to either pulse-dialing (same as rotary dial phones), or tone dialing (DTMF).
To set the dial mode
1. Press
2. Press and select "Setup"
3. Press
4. Press and select 'Dialling mode"
5. Press
6. Press or and select "Pulse" mode or "DTMF mode"
7. Press to confirm

3.7 PABX features

It is possible to use your telephone with a PABX or a local telephone network.
Use of your telephone with a recent system does not require any special adjustment.
With centrain older systems, it is necessary to insert a pause between dialing a
prefix and dialing the rest of the number. Your telephone inserts this pause automati-
cally during dialing.
Choice of prefix
In the menu "SETUP" Select "PABX", enter the confidential code for the base
followed by the prefix.
Choice of pause duration
In the menu "SETUP" Select "PABX" then "PAUSE".

3.8 Security PIN

Changing the PIN
1. Press
2. Press and select "Setup"
3. Press
4. Press and select "PIN code"
5. Press
Note: The PIN is never shown on the display, for security reasons.
Note: Each base unit has its own Personal Identity Number (PIN). The system is
issued with the base unit PIN set to 00000000.
29