Caller Display - Oregon Scientific wd338 User Manual

1.9 Caller display

If you have subscribed to this service from your phone network operator, the
caller's phone number will be shown on the handset display when there is an
incoming call. The phone can store the caller ID's of up to 10 different call numbers.
Note: If the caller's phone number was stored in the phone book, the
associated name will be displayed with the phone number.
Each entry in the caller list has:
* Caller number (up to 20 digits)
* The caller name (up to 8 characters) if this is stored in the phonebook or supplied
from the telephone network.
* The date and time of the last call
* The number of calls made to this number (up to 10)
New call indication
* When a new caller identification is received and
displayed during ringing, the caller identification
will show.
* If the call is not answered the handset display shows
"New Calls: N" to alert the user of new calls
received with the phone icon flashing on the left.
The indication will turn off once you have reviewed
the caller memory by pressing the
Note: N indicates the number of new calls not yet viewed.
How to read the caller identification
1. With the handset in standby mode, press
2. Press or repeatedly to select the name you want to check.
3. Press to check the phone number.
4. Press again to check the time and date of the call.
Note: There is a warning tone when you reach the end of the list.
button.
first to enter the list.
15