Conference Call; Monitor Mode (Baby Sit) - Oregon Scientific wd338 User Manual

2.3 Conference call

You can have a conference conversation with an external call party and two internal
calling parties.
* First establish the call with the external party by either making an external
call or answering an incoming call
* Press to make an intercom call to another handset
* The internal party answers your intercom call by pressing
* Then you press and hold for about 2 seconds (you will hear a
confirmation key tone)
* Then the external party, another internal party and you
can talk together

2.4 Monitor Mode (Baby sit)

This function is similar to intercom. It allows you to call the second handset
automatically by internal call. If it is already set in monitor mode, you can listen to
what is happening in another room by using the second handset like a microphone.
To set the second handset to monitor mode:
* On the second handset, press
* Press repeatedly to select "Monitor Mode"
* Press
* Select Monitor Mode "On"
* The handset display will show "Monitor Mode"
* Now, when you call the second handset from the first handset, the second
handset will automatically answer and you will be in Monitor Mode.
Note: To cancel the Monitor Mode, repeat the above steps and select Monitor
Mode "Off".
When you hang up the first handset, the second handset in monitor mode
will hang up automatically.
25