Specifications - Sanyo PLC-WTC500AL Service Manual

Specifications

Mechanical Information
Projector Type
Dimensions (W x H x D)
Net Weight
Feet Adjustment
Panel Resolution
LCD Panel System
Panel Resolution
Number of Pixels
Signal Compatibility
Color System
SD/HDTV Signal
Scanning Frequency
Optical Information
Projection Lens
Projection Lamp
Interface
Input 1
Input 2
Input 3
AUDIO IN
Analog Out
Audio Out
R/C Jack
Control Port
USB Connector
Option
Audio
Internal Audio Amp
Built-in Speaker
Power
Voltage and Power Consumption
Operating Environment
Operating Temperature
Storage Temperature
Remote Control
Battery
Operating Range
Dimensions
Net Weight
Laser Pointer
● The specifications are subject to change without notice.
● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny
fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.
Multi-media Projector
17 .8" x 6.9" x. 21.7" (451.0 mm x 175.0 mm x 550.1 mm)
32.4 lbs (14.7 kg)
0˚ to 3.5˚
0.95" TFT Active Matrix type, 3 panels
1280 x 800 dots
3,072,000 (1,280 x 800 x 3 panels)
PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N
480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
H-sync. 15 kHz–100 kHz, V-sync. 50 Hz–100 Hz
Optional
330 W NSHA(1 lamp + 1 lamp)
HDMI x 1, Analog (Mini D-sub 15 pin) x 1
BNC Type x 5 (G or Video/Y, B or Cb-Pb, R or Cr-Pr, HV and V)
RCA Type x 1, Mini DIN 4 pin x 1
Audio 1 (Mini Type stereo), Audio 2 (Mini Type stereo), Audio 3 (RCA Type) x 2
Mini D-sub 15 pin x 1
Audio (Mini Type stereo) x 1
Mini Type (Wired Remote) x 1
D-sub 9 pin x 1
USB Series B x 1
PJ-Net Organizer Terminal x 1
3.0 W + 3.0W (stereo)
2 speaker, 1.97" x 3.54" (50 x 90 mm)
AC 100–120 V (5.3A Max. Ampere), 50/60 Hz (The U.S.A and Canada)
AC 200–240 V (2.5A Max. Ampere), 50/60 Hz (Continental Europe and The U.K.)
41˚F–104˚F (5˚C–40˚C)
14˚F–140˚F (-10˚C–60˚C)
AAA or LR03 Type x 2
16.4' (5 m/±30˚)
1.8" (W) x 1.0" (H) x 5.7" (D) (45 mm x 25 mm x 145 mm)
3.5 oz (99 g) (including batteries)
Class II Laser (Max. Output: 1 m W/Wave length: 640–660 nm)
This symbol on the nameplate means the product is Listed by Underwriters
Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety stan-
dards against risk of fire, casualty and electrical hazards.
-4-