Sanyo PLC-WTC500AL Service Manual page 20

Mechanical Disassembly
Mechanical disassembly
1-1. Cabinet Top removal-1
1. While pressing the Lens release button on the top of the cabinet, turn the
lens counterclockwise until it stops and pull it out slowly from the projec-
tor.
2. Remove the terminal covers.
See the items "Lens installation" and "Using the Antitheft screw" in chapter
"Maintenance", for further information of the lens removing.
1-2. Cabinet Top removal-2
1. Remove 9 screws-A (M3x8).
2. Loosen screw-B and open the lamp cover and remove 1 screw-C (M3x8),
and then take the Cabinet Top upward off.
Lens release
button
A
A
A
A
A
c
B
A
A
A
A
-20-
Terminal
covers
Lamp cover