Key Lock; Stopping The Machine - Beko DFN2000X User Manual

If you want your machine to wash
in AUTO programme, press "Start
/ Pause / Cancel" button during
countdown. "Press to wash" message
is displayed.
When you press the "Start / Pause
/ Cancel" button again "AUTO
programme selected" message will
appear and washing will start.

Key Lock

Your machine is equipped with a key
lock function in order to avoid anyone
else but you, particularly the children,
to interfere with and change the
programme flow while the machine is
operating. Key lock also functions as a
safety system that prevents you from
performing accidental operations by
pressing a button unintentionally
when you want to add or take out
dishes from the machine.
Key lock is activated automatically in
the following conditions:
• 30 seconds after the machine is
turned on by pressing the On/
Off button and the programme is
started
• If the programme does not start
within 30 seconds after the
machine is turned on by pressing
the On/Off button
• If you wait more than 30 seconds
when the machine is stopped
during washing
Key lock is deactivated automatically
when the programme is over: If you
press the touch-key at the end of
the programme, machine will display
the "Press to wash" message. If the
machine is left to wait in this status,
key lock will be activated after 30
seconds and "Key Lock Activated" will
be displayed.
If you press the button when the
key lock is active, "Key Lock Active"
is displayed and if you press the key
for a second time, "Press for 5 sec"
is displayed. You must press Start/
Pause/Cancel key until the "Key Lock
Deactivated" message is displayed to
deactivate the key lock.
When you keep the Start/Pause/
Cancel key pressed, the countdown
of 5 seconds starts and the
following messages are displayed
consecutively:
"Unlock the keylock 5"
"Unlock the keylock 4"
"Unlock the keylock 3"
"Unlock the keylock 2"
"Unlock the keylock 1"
"Keylock deactivated"
Key will remain locked if
you release the key before
the "Keylock deactivated" is
displayed. Key lock is deactivated
when the "Keylock deactivated"
message is displayed. You can
press the Start/Pause/Cancel key to
perform the operation you want after
the key lock is deactivated.

Stopping the machine

Deactivate the key lock first if you
want to add/take out dishes to/from
the machine before determining the
level of washing. Then, you can stop
the washing by pressing the Start/
Pause/Cancel key again. In this, case,
following messages will displayed
consecutively:
"Paused"
"Press to continue"
22 GB