Rinse Aid - Beko DFN2000X User Manual

Rinse aid

Use only rinse aid intended for
household dishwashers.
The rinse aid is specially formulated
to be used in the dishwashers for
the prevention of watermarks and
scale on dishes and to increase the
efficiency of the washing and drying
processes. Therefore, make sure that
there is adequate amount of rinse
aid in the rinse aid dispenser of your
machine.
You can adjust the amount of rinse
aid used during the wash programme
by turning the rinse aid dispenser
regulator (C).
The dispenser regulator (C) may be
set between levels 1 and 6 (6 being
the maximum amount of rinse aid
usage). Your machine is pre-set at the
factory to level 4.
According to the finish and drying
results obtained, adjust the dose of
rinse aid by means of the six position
selector. (Position 1: minimum dose,
Position 6: maximum dose.) Gradually
increase the dose if there are drops
of water or lime spots on the dishes
after washing. Reduce it if there are
sticky whitish streaks on the dishes.
Filling the rinse aid dispenser
Open the rinse aid dispenser lid by
pressing the button as shown in the
diagram.
Fill up with rinse aid until the
container is full to level of 'max' mark .
Put the lid (E) on and ensure you hear
the clicking sound.
Remember to CLOSE the lid after
every refill.
Make sure you clean any rinse aid that
you might have spilled.
14 GB