Starting The Programme; Child (Key) Lock; Cancelling The Programme - Beko DFN39340X Instruction Manual

C
Time Delay function can not be set
after the programme starts.

Starting the programme

To start your machine after selecting
the programme and auxiliary
functions, press Start / Pause / Cancel
key.
Once the programme starts a
tune is played and the estimated
time remained to the end of the
programme will appear on the Display
Information Line. Start / Pause
/ Cancel indicator starts lighting
continuously.
C
Your machine performs water
softening depending on the
hardness level of the supply water.
Remaining time displayed towards
the end in some programmes
can be different from the time
indicated at the beginning due to
this process. The total time can
also change while the programme
is running depending on the
ambient temperature where your
machine is installed, temperature
of the supply water and amount of
the dishes.
C
Pay attention not to open the door
of the machine when it is running.
Stop the machine by pressing
Start / Pause / Cancel key if you
have to open the door. Then, open
the door of the machine. There
may be a rush of vapour when you
open the door of your machine;
be careful. Close the door of your
machine and press Start/Pause/
Cancel key again. Programme will
resume running.
C
The machine will remain silent
in pause mode for some time
in order to remove the water in
the machine and on the dishes
completely and to have the water
softener cleaned, and then it will
resume running in drying mode.

Child (Key) Lock

You may prevent other people
from interrupting and changing the
programme cycle and time delay while
the machine is running.
To activate the Child Lock:
1. Pres Child (Key) Lock keys
simultaneously and hold for 3
seconds.
2. "3", "2", "1" is displayed on Display
Information Line and key lock is
activated.
C
Child Lock prevents the selected
programme or functions from
being changed and disables the
Start / Pause / Cancel key.
C
Child Lock does not lock the door
of the machine.
C
If you turn your machine off by
using On/Off key at the end of the
programme, the Child Lock will be
deactivated automatically.
C
For energy saving, the product is
automatically turned off following
the completion of the programme
or if the programme is not started.
To deactivate the Child Lock:
1. Pres Child (Key) Lock keys
simultaneously and hold for 3
seconds.
2. "3", "2", "1" is displayed on Display
Information Line and key lock is
cancelled.

Cancelling the programme

1. Press Start/Pause/Cancel key for 3
seconds to cancel the programme.
2. Release the key when the Start
/ Pause indicator starts flashing.
For a couple of minutes the
37 EN