Starting The Programme; Child (Key) Lock - Beko DFN29330X Instruction Manual

Hide thumbs Also See for DFN29330X:
Table of Contents

Advertisement

4. Press Start / Pause / Cancel key
to start countdown for the Time
Delay. Time Delay indicator and
Start / Pause indicator will light
continuously until the end of the
period. Time Delay is displayed
on the Display Information Line.
Selected programme will start as
soon as the countdown is over.
Changing the settings while Time
Delay function is enabled
While the Time Delay function is
activated, you cannot make changes
in the washing programme, auxiliary
functions or the duration of delay
time.
C
Programme and auxiliary
functions cannot be set/changed
after the programme has started.
To cancel the Time Delay function
1. Press and hold Start / Pause /
Cancel key for 3 seconds.
2. When the Start / Pause / Cancel
key is pressed and hold, "3", "2", "1"
appear on the Display Information
Line. Time Delay indicator will turn
off at the end of the cancellation
process and delaying process is
cancelled.
C
You can select and start a
new programme following
the cancellation of Time Delay
function.
C
Time Delay function can not be set
after the programme starts.

Starting the programme

To start your machine after selecting
the programme and auxiliary
functions, press Start / Pause / Cancel
key.
Once the programme starts a
tune is played and the estimated
time remained to the end of the
programme will appear on the Display
Information Line. Start / Pause / Cancel
indicator starts lighting continuously.
C
Your machine performs water
softening depending on the
hardness level of the supply water.
Remaining time displayed towards
the end in some programmes
can be different from the time
indicated at the beginning due to
this process. The total time can
also change while the programme
is running depending on the
ambient temperature where your
machine is installed, temperature
of the supply water and amount of
the dishes.
C
Pay attention not to open the door
of the machine when it is running.
Stop the machine by pressing Start
/ Pause / Cancel key if you have to
open the door. Then, open the door
of the machine. There may be a
rush of vapour when you open the
door of your machine; be careful.
Close the door of your machine
and press Start/Pause/Cancel key
again. Programme will resume
running.
C
The machine will remain silent
in pause mode for some time
in order to remove the water in
the machine and on the dishes
completely and to have the water
softener cleaned, and then it will
resume running in drying mode.

Child (Key) Lock

You may prevent other people
from interrupting and changing the
programme cycle and time delay while
the machine is running.
To activate the Child Lock:
1. Pres Child (Key) Lock keys
simultaneously and hold for 3
seconds.
36 EN

Advertisement

Table of Contents
loading

Table of Contents