Before First Use; Turbo Fan Heat Drying System; Installation - Beko DFN2000X User Manual

Before first use

3
After unpacking your dishwasher,
check the machine against any
possible transportation damage.
Never install and use damaged
machines. If your machine is damaged
contact your retailer. Always have
your machine installed by qualified
electrician/plumber to ensure correct

installation.

Any repairs and maintenance work
on this dishwasher should be carried
out by authorised service staff only.
Unauthorised repairs are not only
dangerous, but also lead to the
cancellation of your warranty.
If your dishwasher has an Internal
Lighting; incase of a defect broken
lamps can be changed by an
authorized service technican.
Make sure the electricity and water
connections of your dishwasher are
in compliance with the instructions
for assembly as stated in the relevant
part of this booklet.
It is recommended that the
dishwasher is operated without
dishes for very first wash for
hygiene reasons.
Before the first wash, add 1 lt of
water to the salt container of
your machine.
Turbo fan heat drying
system

Turbo Fan Heat Drying System

ensures your dishes are dried
efficiently.
! During operation you may hear fan
noise which is normal.
4 Installation
When deciding on where to install
your new dishwasher, ensure that the
position of your dishwasher makes
it easy and quick for you to place the
dishes in the dishwasher and also to
take them out and store away after
the dishwashing is completed.
Avoid placing the dishwasher where
the ambient temperature is likely to
fall below. 5 degrees C. (41° F)
When positioning your appliance,
take care not to damage your flooring,
pipes wall coverings etc. Do not move
the appliance by pulling by the door or
handle
7 GB