Protecting The Environment - Black & Decker KC9036 Original Instructions Manual

Or switch off and remove the battery from the appliance/
u
tool if the appliance/tool has a separate battery pack.
Or run the battery down completely if it is integral and then
u
switch off.
Unplug the charger before cleaning it. Your charger does
u
not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in your appliance/tool/
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior (when fitted).

Protecting the environment

Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
z available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Battery (fig. G)
Z
If you want to dispose of the tool yourself, the
battery must be removed as described below and
disposed of in accordance with local regulations.
Do not short-circuit the battery terminals. Do not use
tools to remove the battery; only use your fingers.
If possible, operate the tool to run the battery down
u
completely.
Hold the tool as shown in fig. G.
u
Gently knock the battery cover against a hard surface
u
such as a workbench to loosen the cover.
Remove the cover.
u
Pull the battery out and disconnect the wires to remove it
u
from the tool.
Place the battery in a suitable packaging to ensure that
u
the terminals cannot be short-circuited. Take the battery to
your service agent or a local recycling station. Collected
batteries will be recycled or disposed of properly.
Technical data
Voltage V
No-load speed min
Max. torque Nm 3.9
Bit holder mm 6.35 (1/4")
Weight kg 0.39
Charger
Input voltage V
Approx. charging time
Weight kg 0.16
Level of sound pressure according to EN 60745:
Sound pressure (L ) 58 dB(A), uncertainty (K) 3 dB(A)
pA
Acoustic power (L ) 69 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to
EN 60745:
Screwdriving without impact (a
uncertainty (K) 1.5 m/s
ENGLISH
KC9036 H 1 KC9039 H 1
3.6 3.6
DC
180 180
-1
3.9
6.35 (1/4")
0.55
230
AC
h 12
) 0.26 m/s ,
2
h, S
2
9