Table of Contents
Advertisement
NetComm VoIP WiFi Phone V24W User Guide
Power down the device by pressing the Power button for 3
13
seconds. Then turn it back on. You will see the prompt for
Phone Password. Enter the user password and then press
the OK soft key.
Note: Default user password is 0000
Now you can access the SIP settings page.
14
Press Menu soft key and then select SIP Settings.
A list of SIP settings will be displayed. Select Proxy IP and
15
press Edit soft key.
Note: not all settings are necessary.
Enter the Proxy IP address in the prompt window and press
16
the Center Selection Key.
Note: Press the * (star) key to switch between the different modes (Capital
letters, small letters and numbers).
YML873 V24W User Guide - 11
Advertisement
Table of Contents
