NetComm V24W User Manual page 10

NetComm VoIP WiFi Phone V24W User Guide
5b. If WPA security is enabled on the selected network, a
new screen will appear. Enter the network's WPA key. Then
press the Center Selection Key.
You will be notified when the IP Phone has connected to the
6
network, and a checkmark will appear next to the name of
the network. Press the Exit soft key to go back to the standby
screen.
The standby screen will appear.
7
Press the Menu soft key. Then select Phone Settings.
8
YML873 V24W User Guide - 9