InFocus X2 Service Manual page 20

7 Remove the front IR lens by pressing it from the outside so that you can remove it from the
inside.
Assembly Notes
♦
Fasten the inner grill to the front bezel with the two M3x8 Plastite screws.
♦
Press the IR lens into place from the inside of the front bezel.
♦
Align the front bezel against the front of the projector. Press the bezel into position to lock the two
tabs and slotted receiver against the top case.
♦
Tighten the two M3x10 Plastite Phillips screws securely. Do not over tighten the screws.
X2 Service Manual 20