Other Operations; Setting Up Party Chain; Using The Party Chain Function - Sony MHC-V11 Operating Instructions Manual

Other Operations

Using the Party Chain function

You can connect multiple audio systems in a chain to create a more interesting
party environment and to produce higher sound output.
An activated system in the chain will be the "Party Host" and share the music.
Other systems will become "Party Guests" and play the same music as that being
played by the "Party Host."
Setting up the Party Chain
Set up a Party Chain by connecting all the systems using audio cords (not
supplied).
Before connecting cords, be sure to disconnect the AC power cord.
 If all the systems are equipped with the Party Chain function
Example: When connecting using this system as the first system
Last system
• The last system must be connected to the first system.
• Any system can become a Party Host.
• You can change the Party Host to another system in the chain. For details, see
"To select a new Party Host" (page 30).
• Make sure the function other than the Audio In function is selected. When the
Audio In function is selected, the Party Chain function cannot be activated.
28
GB
Continue the
connection
until the last
system.
Second system
First system