Toyota 4runner 2016 Owner's Manual page 439

Installing the spare tire
1
Remove any dirt or foreign mat-
ter from the wheel contact sur-
face.
If foreign matter is on the wheel
contact surface, the wheel nuts
may loosen while the vehicle is in
motion, causing the tire to come
off.
2
Install the spare tire and loosely tighten each wheel nut by hand by
approximately the same amount.
When replacing an aluminum
wheel with a steel wheel,
tighten the wheel nuts until the
tapered portion comes into
loose contact with the disc
wheel seat.
When replacing an aluminum
wheel with an aluminum wheel,
tighten the wheel nuts until the
washers comes into contact
with the disc wheel.
4RUNNER (U)_(OM35B23U)
7-2. Steps to take in an emergency
I n f o r ma t i o n P r o v i d e d b y :
439
Tapered
portion
Disc wheel seat
7
Washer
Disc wheel