Table of Contents
Advertisement
5
Position the jack at the jack
points as shown.
Front - Under the chassis frame
side rail
Rear - Under the rear axle
housing
6
Raise the vehicle until the tire is
slightly raised off the ground.
When positioning the jack under
the rear axle housing, make sure
the groove on the top of the jack
fits with the rear axle housing.
7
Remove all the wheel nuts and
the tire.
When resting the tire on the
ground, place the tire so that the
wheel design faces up to avoid
scratching the wheel surface.
4RUNNER (U)_(OM35B23U)
7-2. Steps to take in an emergency
I n f o r ma t i o n P r o v i d e d b y :
437
7
Advertisement
Table of Contents
