Table of Contents
Advertisement
134
3-3. Adjusting the seats
4
While pressing the recalled
button, press and hold the
door lock switch (either lock
or unlock) until the buzzer
sounds.
If the button could not be regis-
tered, the buzzer sounds contin-
uously
for
seconds.
■
Recall procedure
Carry the electronic key that has been registered to the driving
position, and then unlock and open the driver's door using the
smart system or wireless remote control.
The driving position will move to the recorded position.
If the driving position is in a position that has already been recorded, the
seat will not move.
■
Cancelation procedure
Carry only the key you want to cancel and then close the driver's
door.
If 2 or more keys are in the vehicle, the driving position cannot be
canceled properly.
1
Turn the engine switch to IGNITION ON mode.
2
While pressing the "SET" button, press and hold the door lock
switch (either lock or unlock) until the buzzer sounds twice.
If the button could not be canceled, the buzzer sounds continuously for
approximately 3 seconds.
■
Recalling the driving position using the memory recall function
●
Different driving positions can be registered for each electronic key. There-
fore, the driving position that is recalled may be different depending on the
key being carried.
●
If a door other than the driver's door is unlocked with the smart system, the
driving position cannot be recalled. In this case, press the driving position
button which has been set.
■
Customization
The unlock door settings of the memory recall function can be customized.
(Customizable features: P. 485)
4RUNNER (U)_(OM35B23U)
approximately
3
I n f o r ma t i o n P r o v i d e d b y :
Advertisement
Table of Contents
