Table of Contents
Advertisement
322
5-4. Other interior features
3
Test the HomeLink
grammed button and observing the indicator light:
● If the indicator light is solid/continuous, programming has been
completed and your device should activate when the
HomeLink
● If the indicator light blinks rapidly for 2 seconds and then turns
into a solid/continuous light, proceed to the heading "Program-
ming a rolling code system".
4
Repeat the steps above to program another device for any of
the remaining HomeLink
■
Programming a rolling code system
1
Locate the "learn" or "smart"
button on the garage door
opener motor in the garage.
This button can usually be found
where the hanging antenna wire
is attached to the unit. The
name and color of the button
may
vary
Please refer to the owner's man-
ual supplied with the garage
door opener motor for details.
2
Press and release the "learn"
or "smart" button.
Perform
onds after performing
4RUNNER (U)_(OM35B23U)
®
operation by pressing the newly pro-
®
button is pressed and released.
®
buttons.
by
manufacturer.
3
within 30 sec-
2
.
I n f o r ma t i o n P r o v i d e d b y :
Advertisement
Table of Contents
