Hardware Installation - Ubiquiti EdgeSwitch ES-48-500W Quick Start Manual
Managed poe+ gigabit switch with sfp+
Hide thumbs
Also See for EdgeSwitch ES-48-500W:
- Quick start manual (14 pages) ,
- Command reference manual (435 pages) ,
- Administration manual (274 pages)
Table of Contents
Advertisement
Hardware Installation
WARNING:
MAY CAUSE FIRE HAZARD. KEEP AT LEAST 20 MM OF
CLEARANCE NEXT TO THE VENTILATION HOLES FOR
ADEQUATE AIRFLOW.
1. Connect the Power Cord to the Power port of the
EdgeSwitch.
2. Attach the EdgeSwitch to the rack using the four Mounting
Screws. (If the rack has square slots, then use the Cage Nuts
with the Mounting Screws.)
FAILURE TO PROVIDE PROPER VENTILATION
Hide quick links:
Advertisement
Table of Contents
