Brother mfc8440 Service Manual page 47

CHAPTER 2 INSTALLATION AND BASIC OPERATION
NOTE:
•
There will be two Brother printer drivers listed in the Printers selection.
•
The driver with "Printer" after the model name (ex. Brother MFC-8840D Printer) is the
Brother Native Driver.
OK:
The Brother Native Drivers have been installed and the installation is now complete.
< For Windows
Make sure that you followed the instructions in (1) to (16) on
(17) When this screen appears, connect the parallel interface cable to your PC, and then
connect it to the machine.
Turn on the machine by plugging in the power cord. Turn the power switch on.
The installation of the Brother drivers will automatically start.
The screen appears one after another, please wait for a while.
(18) The README.WRI file will be displayed.
Please read this file for troubleshooting information and then close the file to continue
installation.
(19) When the following screen appears, click Finish and wait as the PC restarts Windows
and continues the installation.
OK:
This completes the installation of the Windows
the Brother PC-FAX and scanner drivers.
Brother also offers a Native Driver on the CD-ROM. The Brother Native Driver offers
some features that are not available with the Windows
the Brother Native driver proceed to step (20).
Brother Native driver Installation
(20) Click Start and select Printers and Faxes.
Click on Add a printer and the Add Printer Wizard will start.
When this screen appears, click Next.
(21) Un-check the Automatically detect and install my Plug and Play printer selection and
then click Next.
(22) Select BMFC (Brother MFL Port) from the pull down window for the Printer Port
Selection and then click Next.
(23) Click on Have Disk.
(24) Browse the CD-ROM for the WXP folder.
Highlight the WXP folder and click Open.
Highlight the Addprt folder and click Open.
(25) Click Open.
(26) Make sure X:\WXP\Addprt is displayed in the window and click OK (X:\ is the drive letter
of your CD-ROM).
®
XP Users Only >
pages 2-13 to
®
Logo Tested (WHQL) printer driver and
®
Logo Tested Driver. To install
2-16
2-14.