Unpacking - Brother mfc8440 Service Manual

CHAPTER 2 INSTALLATION AND BASIC OPERATION
2.

UNPACKING

When unpacking the machine, check to see that all of the following components are included
in the carton.
MFC
1. Control Panel
2. Face-down Output Tray
Support Flap (Support Flap)
3. Manual Feed Tray
(For MFC-8440, DCP-8040)
Multi-purpose Tray (MP Tray)
(For MFC-8840D/8840DN, DCP-8045D/8045DN)
ADF Support
Carton components may differ from one country to another.
Save all packing materials and the carton.
NOTE:
•
The interface cable is not a standard accessory. Please purchase the appropriate
interface cable for the interface you intend to use (Parallel or USB).
•
For Parallel use a bi-directional shield interface cable that is IEEE 1284-compliant, and not
longer than 6 feet (2 meters).
•
For USB: use a Hi-Speed USB 2.0 interface cable that is not longer than 6 feet (2 meters).
•
Please make sure that you use a Hi-Speed USB 2.0 certified cable if your computer uses
a Hi-Speed USB 2.0 interface.
•
Even if your computer has a USB 1.1 interface, you can connect the machine.
1
2
3
4
Telephone
Line Cord
8
7
6
5
4. Paper Tray
5. Front Cover
6. Power Switch
7. Document Cover
8. Automatic Document Feeder (ADF)
Drum Unit Assembly
(including Toner Cartridge)
Test Sheet
(U.S.A. only)
Fig. 2-1
2-2
Quick Setup Guide
CD-ROMs
®
For Windows (1 piece)
®
For Macintosh (1 piece)
User's Guide
AC Power Cord
Accessory Order Form
(U.S.A./Canada only)