Running The Setup Utility - Brother mfc8440 Service Manual

APPENDIX 2 INSTALLING THE UPDATE DATA
2.3

Running the Setup Utility

(1) On your PC, run the ID/head property setup utility (BRUSBSN.EXE). The following
window will appear.
(2) On the Model menu, click MFC 2.
In Port, make sure that the HFC/DCP ports connected are shown.
When not select, please click
8440 or DCP-8045 or DCP-8040.
In the Serial No = 000 box, type the 9-digit serial number (e.g., G01012345) printed on
the nameplate labeled to the back of the machine as an ID code. Then press the OK
button.
The setup utility will transmit the ID code data from your PC to the machine and then it
will terminate.
The machine will automatically return to the standby mode.
(3) To check whether the entered character string (ID code) is correct, make the machine
then press the 8 key and 0 key in this order
The USB serial number appears on the LCD.
(4) Check that the character string entered in step (2) is appears on "XXXXXXXXX."
If it is OK, press the Stop button and press the 9 key twice to exit from the maintenance
mode.
If something other than that is printed in XXXXXXXXX, check the connection between
the PC and machine and go back to step (1).
button and select the USB port of MFC-8840 or MFC-
(refer to CHAPTER 7, Subsection
A-6
3.15).