Menu Operation; How To Navigate Menus; Configuring The Channel Menu - Changhong Electric uhd55b6000is Operation Manual

Menu Operation

How to Na vigate Menus
Before using the TV follow the steps below to learn how to navigate the menu in order to
select and adjust different functions. The access step may differ depending on the
selected menu.
1. Press the MENU button to display the main menu.
2. Press the◄/►button to cycle through the main menu. Press the ENTER button to
access the submenu.
3. Press the▲/▼button to select the desired sub item, then press the ENTER button.
4. Press the ▲/▼/◄/► button to select the desired value. To save the setting, press
ENTER. The adjustment in the OSD may differ depending on the selected menu.
5. Press the MENU button to return to the previous menu.
6. Press the EXIT button exit from the menu.
NOTE:
• When an item in MENU is displayed gray, it means that the item is not available or
cannot be adjusted.
• Buttons on the TV have the same function as corresponding buttons on the remote
control. If your remote control is lost or couldn't work, you may use the buttons on the
TV to select menus. This manual focuses on operation of the remote control.
• Some items in the menus may be hidden depending on modes or signal sources used.

Configuring the Channel Menu

■ Antenna
Selecting an antenna source.
◆ When TV signals is Air.
■ Auto Tuning
Select the ENTER button to start Auto Tuning.
1. Select the country and tune type for channels.
2. The TV will begin memorizing all of the available
Channels.
Once the progress bar is full, the found channels will
be stored and the unit will proceed to the search for
TV, DTV, Radio and Data.
If you press the MENU button in DTV searching, the
Channel Tuning will skip to TV searching as the
suggestive picture shows.
15