Basic Operation
QUICK START GUIDE
■ Initial Setup
1.The first time you power on the TV, the
"Installation Guide" will be showen on the TV screen.
Please follow below procedures to do first
installation including channel seaching.
2.Selecting a language
▲/▼
Press the
►
press the
button.
3.Selecting a Picture Mode
▲/▼
Press the
then press the
4.Selecting a Antenna
▲/▼
Press the
►
press the
button.
5.Selecting a Country
▲/▼
Press the
►
press the
button.
6.The TV starts Auto Tuning.
NOTE:
• If the TV doesn't receive any channels, please check your aerial connection or the
country you selected, then try an auto search again.
• If the TV just receives some of the channels, it means the aerial's reception isn't good
enough and an antenna service is recommended.
•
For this TV set works with linux operating system, the TV may automatically restart or
the remote control does not respond when it is being used. If the remote control does
not respond, please turn off the power and restart the TV.
button to select a language, then
button to select a Picture Mode,
►
button.
button to select a Antenna, then
button to select a Country, then
13