COLOR TELEVISIONS INSTRUCTION MANUAL CHASSIS NO. CH-16CA Some functions there are not available for some models. Designs and specifications are subject to change without notice. Please read this manual carefully before operation.
You will find the model number and chassis number of your TV on the back of your TV set. Record these numbers in the spaces provided below. Refer to them whenever you call CHANGHONG customer service or your CHANGHONG dealer regarding this product.
Instruction Manual IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8.
Useful Remote Control Features TROUBLESHOOTING GUIDE ··········································································································12 Note: The OSD and illustration in this manual may be somewhat different from the actual situation, depending on your model. SPECIFICATIONS (Taking H2139 for example) MODEL H2139 Television System PAL-M, PAL-N, NTSC Channel Coverage...
Channel Label -used to label channels On/Off Timer - feature that allows the user to set a timer to turn on/off the TV and tune the TV to a preset channel at preset time Note: The following list the features of H2139. FEATURES H2139 ·...
Instruction Manual INTRODUCTION (continued) Front and Rear Unit Profiles The following illustrate front and rear unit profiles of H2139. Front panel Rear panel CH-16CA...
Instruction Manual INTRODUCTION (continued) Remote Control Features STANDBY Turns on/off the TV KEYPAD Used to select channels by number CH + / - Used to change the current channel P.MODE Selects the various Picture Modes RECALL Returns to the last channel viewed DISPLAY Brings up the TV/Video display LABEL...
Instruction Manual INSTALLATION - Please read the safety instructions in this manual completely before installation. - Install your TV in an area where direct sunlight will not fall upon the screen. - Soft, indirect light is best for television viewing. - Allow enough space (at least 4 in.) between the TV and any walls or enclosures for proper ventilation.
Connect VCR's RF OUT terminal to the RF IN jack located on the real panel of the TV. Coaxial Cable RF IN The following illustrate the connections with H2139. Other models’ connections are identical. Input from Device to TV AUDIO/VIDEO IN DO NOT connect AV IN, S-Video and DVD terminals at the same time.
Instruction Manual FUNCTIONS & FEATURES Turn On/Off 1. Turn On Plug in the supply cord, and press the MAIN POWER SWITCH on the TV. The TV will enter the STANDBY mode, and the power indicator light will turn on. Pressing the STANDBY or CH+/- on the remote control or – CH + on the TV can turn on the TV.
Page 11
Instruction Manual FUNCTIONS & FEATURES (continued) Function Selection Menus (continued) Audio Setting Menu This menu allows you to adjust the various audio settings. Audio Setting Sound Mode User Access Sound Control Surround From the Main menu screen, press the left or right arrow key until Audio Setting is highlighted.
Page 12
Instruction Manual FUNCTIONS & FEATURES (continued) Function Selection Menus (continued) Channel Label: This feature allows you to label channels in up to 5 characters. Use the up or down arrow key to highlight Channel Label, Channel Label and the right arrow key to call up the sub menu. →Channel 1.
Instruction Manual FUNCTIONS & FEATURES (continued) Function Selection Menus (continued) MPAA-Rating: Use the up or down arrow key to navigate between MPAA-Rating the ratings. Pressing the MENU key with a rating highlighted will →G block that particular rating from being shown on this TV. A U PG-13 indicates a rating which is unblocked and a B indicates a rating which NC-17...
Page 14
Instruction Manual FUNCTIONS & FEATURES (continued) Useful Remote Control Features (continued) P.mode Your TV has factory preset picture modes that allow you to optimize your TV viewing. To activate these picture modes, press the P. MODE and you can choose among User, Normal, Movie and Sports. S.mode Press the S MODE key repeatedly, and you can choose among User, Normal, Movie, Speech and Music.
Instruction Manual TROUBLESHOOTING GUIDE Check the following guide for a possible correction to a problem before contacting customer service. Symptoms Correction ·Verify the power cable to plug into an outlet with power. No power ·Verify the connection from the DVD/VCR video output to the TV video input is secure. No picture Then switch TV to the appropriate Video mode.