Menu Operation; How To Navigate Menus; Channel Menu - Changhong Electric LED28C2000 Operation Manual

Menu Operation

How to Navigate Menus

Before using the TV follow the steps below to learn how to navigate the menu in order
to select and adjust different functions. The access step may differ depending on the
selected menu.
1. Press the MENU button to display the main menu.
2. Press the◄/►button to cycle through the main menu.
to access the submenu.
3. Press the▲/▼button to select the desired sub item.
Press the ▲/▼/◄/► button to select the desired value.The adjustment in the
4.
OSD may differ depending on the selected menu.
Press the MENU button to return to the previous menu.
5.
6. Press the EXIT button exit from the menu.
NOTE:
When an item in MENU is displayed gray, it means that the item is not available or
cannot be adjusted.
Buttons on the TV have the same function as corresponding buttons on the remote
control. If your remote control is lost or couldn't work, you may use the buttons on the
TV to select menus. This manual focuses on operation of the remote control.
Configuring the Channel Menu
• Auto Tuning
Select the ENTER button to start Auto
Tuning.
1. Select the country and tune type for
channels.
2. The TV will begin memorizing all of the
available channels.
Once the progress bar is full, the found channels will
be stored and the unit will proceed to the search for
TV, DTV, Radio and Data.
If you press the MENU button in TV searching, the
Auto tuning will skip to DTV searching as the
suggestive picture shows.
CHANNEL
PICTURE SOUND TIMER
12
OPTION
LOCK
Press the ENTER button
then press the ENTER button.