4-6) Load Status Display - Samsung RS2530B Service Manual

ALIGNMENT AND ADJUSTMENTS

4-6) LOAD STATUS DISPLAY

1) When pressing "ICE TYPE" and "FILTER RESET(LIGHT)" KEYS simultaneously for 6 sec. in normal
operation, the indicators of temp set in Freezer/Refrigerator will all ON/OFF for 2 sec. at the interval of 0.5 sec.
At this point, when pressing Temp Set Key in Refrigerator while canceling "ICE TYPE" and "FILTER
RESET(LIGHT)" KEYS, it operates load status display.
2) Load status display will show the load in operation REAL TIME.
However, it is not related to real status of operation of load and it only shows the directed status of the load
operation command from MICOM.
3) Only corresponding ICON for the load in operation will be ON/OFF repeatedly and turned off.
4) Load status display will continue for 30 sec. and it will restore to the normal state.
Details by LED ON locations indicating load status
NO ITEMS
01
Damper
Condition for
02
over load
Condition for
03
low temp
04 COMP
Freezer Defrost
05
Heater
06
Freezer FAN
07 Exhibition Mode
08 Dispenser Heater
09
Damper Heater
① Press for 6 seconds
DISPLAY LED
Refrigerator "MIN" (1'st)
Refrigerator "MID" (3'rd)
Refrigerator "MAX" (5'th)
Freezer "MIN" (1'st)
Freezer "MID" (3'rd)
Freezer "MAX" (5'th)
ICE OFF
CUBE LED
CRUSH LED
31
PROBLEM
LED ON whenDamper is open
LED ON when Ambient temp is over (95°F/35 °C)
LED ON when ambient temp is lower than (62.6 °F/17 °C)
Relevant LED ON whenCOMP operates
LED ON when Freezer Defrost Heater operates
Relevant LED ON when Freezer-FAN HIGH operates
LED ON in Display mode
Relevant LED ON when Dispenser Heater gets ON
Relevant LED ON when Damper Heater gets ON
② Press after ①